How to Rewire A Lamp? Step-by-Step Guide

  • Home Decor 101
  • Posted by: amy-golden
  • Apr 25, 2024

Easy-to-follow and cost-saving instructions on how to rewire a lamp are necessary, as normal lamps can only be used for a short time before needing to be rewired. That broken lamp will no longer be left unused as you can bring it back into functionality.

Project evaluation

Skill Estimated Cost Estimated Time
Beginner level $10 to $20 30 minutes

Overview and Anatomy of A Lamp

The diagram below depicts an essential component of a lamp with detailed terminology, providing an extensive introduction before starting to rewire an old lamp.

  • Shade: The part defends people's eyes from the bulb's brightness.
  • Socket shell: A socket-protecting enclosure containing the insulation sleeve and the socket.
  • Insulation sleeve: A molded paper sleeve that tightly connects across the lamp socket and the external metal socket sleeve, with the function of protecting the lamp body from heat and electricity.
  • Harp: A horseshoe-shaped piece of metal holding the lamp shade and connects to the socket.
  • Socket: Which contains the lamp switch and socket terminals.
  • Switch: Which links to the socket base and switches the lamp on and off.
  • Underwriter’s knot: Safety knot for a lamp cord to pass through a hole in plug or socket, preventing fire and electrocution. 
  • Harp holder: This part ensures the support of both the lampshade and the bulb.
  • Threaded tube: Which connects the light wires from the body of the lamp to the base and light bulb.
  • Body: The lamp's mid to lower section serves an aesthetic function.
  • Cord or cord plug: This part makes the connection between the lamp and the socket.
  • Felt: The lamp can be held in place on a surface using felt or other anti-slip materials.
The main components and assembly of a lamp (source: familyhandyman)
The main components and assembly of a lamp (source: familyhandyman)

Necessary Suppliers for Rewiring A Lamp

Before beginning the project, it's vital to collect the necessary tools and materials to rewire a lamp as well as the estimated cost of the project with many reusable items.

Materials Uses
Screwdriver

Screwdriver

A screwdriver can be used for removing any screws and tightly attaching the new wiring and socket.
Wire Cutters

Wire cutters
Wire cutters
Wire cutters and strippers are crucial for removing and cutting old wires.
Pliers (needle-nose and diagonal)

Needle-nose pliers

Diagonal pliers

Needle-nose pliers are used for clasping and modifying tiny pieces of components.
Electrical Tape

Electrical tape

Electrical tape preserves and insulates the connections of wires, adding an additional layer of protection.
New lamp cord with plug

New lamp cord with plug

Select a lamp cord that complements the size and color of your lamp and receptacle.
Replacement lamp socket (optional)

Replacement lamp socket (optional)

If the current socket has been broken or obsolete, a replacement lamp socket is necessary to replace the old one.
Measurement tape

Measurement tape

Measurement tape helps calculate the required length of the wire.
Heat shrink tubing

 (optional)

Heat shrink tubing

Heat shrink tubing can provide a more competent and secure finish.
Heat gun (or lighter)

Heat gun

To shrink the tubing safely and efficiently, either a heat gun or lighter is definitely the best choice.
Safety Glasses

Safety glasses

This tool protects your eyes from the risk of impact with tools, materials, or flying debris, as well as exposure to hazards like dust or chemicals.
Safety gloves

Safety gloves

Safety gloves protect your hands, fingers, thumbs, and wrists from specific external forces, chemicals, elements, and hazards while working on the project.
Multimeter

Multimeter

A multimeter helps to check the electricity in appliances.

Step-by-Step Guide to Rewire a Lamp

Step 1: Prepare the Work Area & Safety Gear

Set up a bright and spacious workspace with a non-conductive surface such as a clean table or desk of standard size with all the necessary tools and materials within reach.

Set up a well-lit and non-conductive work space (source: atomicobject)
Set up a well-lit and non-conductive work space (source: atomicobject)

Also, prepare some of the main personal protective equipment, such as gloves, eyeglasses, and full-body suits if possible to protected yourself  against any electric-related accidents. 

Prepare the main personal protective equipment (source: sama majan)
Prepare the main personal protective equipment (source: sama majan)

Note: Epoxy lamps are favorites of many people. To rewire this kind of lamp, you may need a glue gun and a particular lamp rewiring kit for LED light along with the aforementioned suppliers. 

Rewiring an epoxy lamp requires additional suppliers (source: hirosart)
Rewiring an epoxy lamp requires additional suppliers (source: hirosart)

Step 2: Disconnect the Lamp From The Power Source

To ensure safety while rewiring a lamp, disconnect it from the power sourceby following these procedures:

Firstly, switch off the lamp and turn off the circuit breaker and always double-check for power even after unplugging and turning off the circuit breaker to prevent any electricity-related accidents.

Switch off the circuit breaker before starting to rewire a lamp (source: urdesignmag)
Switch off the circuit breaker before starting to rewire a lamp (source: urdesignmag)

Secondly, unplug the device from the outlet by slowly but securely grasping the plug rather than the cord. Then, wait for the lamp to naturally cool down if it has just been used recently. 

Unplug the lamp from the outlet by grasping the plug rather than the cord (source: sempersolaris)
Unplug the lamp from the outlet by grasping the plug rather than the cord (source: sempersolaris)

Lastly, check the electrical cord to detect any visible frayed or cracked signals. In case there are any problems, the decision is to replace the entire cord rather than try to repair it. 

Note: Even after unplugging and turning off the circuit breaker, it is essential to double-check for power and verify that the lamp is completely disconnected from the power source.

Detect any visible frayed or cracked signals on the cord (source: hunker)
Detect any visible frayed or cracked signals on the cord (source: hunker)

Step 3: Disassemble the Lamp

For some particular kind of lamp, you may have to disassemble the lamp to reach the wiring and socket. Therefore, to successfully separate the lamp's components (lampshade, harp, and bulb), you can consult the information in the manufacturer's guidance.

Refer to documentation from manufacturer to disassemble a lam (source: device. Report)
Refer to documentation from manufacturer to disassemble a lam (source: device. Report)

Next, check for screws, clips, or other types of fasteners retaining the lamp together and remove them with a suitable screwdriver. Begin the disassembly by removing the shade, then unscrewing the bulb and squeezing the socket shell at the switch to take it out of the socket cap. Finally, unfasten the socket's terminal screws and pull the cord wires from beneath them.

Carefully disassemble every parts of the lamp by checking screws, clips, or other types of fasteners (source: autodesk instructables)
Carefully disassemble every parts of the lamp by checking screws, clips, or other types of fasteners (source: autodesk instructables)

With epoxy lamps, disassemble with gentle movement and use a mini saw or some chemicals like release agents to separate the components. 

Separate the components of an epoxy lamp (source: etsy) 
Separate the components of an epoxy lamp (source: etsy)

Step 4: Inspect for Damage

When reaching the socket and wiring, access the condition carefully and inspect them for melted insulation or broken connections. Take note of any problems to easily resolve throughout the rewiring process.

Inspect the socket and wiring to check for indications of impairment (source: lamp parts repair)
Inspect the socket and wiring to check for indications of impairment (source: lamp parts repair)

Step 5: Remove Old Wiring

Now that the lamp has been safely disconnected and all of its parts have been made accessible, it is time to rewire the old. Identify the pair of wire connections: the neutral wire with white or pale-colored insulation connects to the socket, and the hot wire is associated with the plug. 

Identify the neutral and hot wires (source: activerain)
Identify the neutral and hot wires (source: activerain)

Then, detach these wires by using wire-cutter tools to cut the wire connections respectively at the socket and at the plug. Make a note regarding the grounding wire, which is typically colored green or bare copper and may be connected to the plug. This wire plays an important role in maintaining safety and may need to be reconfigured later on. 

Finally, remove the old wiring from the lamp body and check the socket and plug for signs of deterioration. Replace the old ones if possible. 

Cut and remove the old wire (source: apartment therapy)
Cut and remove the old wire (source: apartment therapy)

Step 6: Prepare the New Cord

After finishing removing-the-old-wire step, prepare the new cord by determining the amount of wire required for your lamp. Measure and calculate the flexible distance from the lamp socket to the plug. And then, strip the wire ends by using the wire strippers to remove the insulation from the ends of the new wire. 

The ideal amount of insulation is about 1/2 inch. You may utilize heat shrink tubing if you want an additional layer of protection and a professional finish. If the lamp includes grounding wire, either green or bare copper, make sure it's sufficient length to fit into the plug. Strip one of the ends of the grounding wire, then, slide it onto the stripped end if using heat shrink tubing.

Measure the new cord and use pliers to strip the ends (source: the spruce)
Measure the new cord and use pliers to strip the ends (source: the spruce)

If you rewire an epoxy lamp using LED lights with a plug, check that there is sufficient wire at the end so that the lamp can connect to the plug socket from a secure distance, rather than right up against it.

Check the length of wire for epoxy lamp (source: ebay)
Check the length of wire for epoxy lamp (source: ebay)

Step 7: Connect the New Cord to the Socket

Locate the hot (brass-colored) and neutral (silver-colored) wires to identify the lamp socket terminals. Next, connect a grounding wire to the socket's established grounding terminal. This type of connection is frequently either a green screw or a wire connector marked with a grounding sign. Maintain a secure connection.

Note: If your socket has issues such as being broken or rusty, you should replace it with a new one and proceed to wire a lamp socket.

Make the connection of the new cord and the lamp socket (source: family handyman)
Make the connection of the new cord and the lamp socket (source: family handyman)

Step 8: Insulate the Connections

Insulate the wire connections by sliding the heat shrink tubing over the stripped ends of the hot and neutral wires, then putting the hot or neutral wire into the socket's terminal and securing them by wrapping around a screw terminal or inserting them into a wire connector and tightening with screws.

Insulate the connections with heat shrink tubing method (source: hellermanntyton)
Insulate the connections with heat shrink tubing method (source: hellermanntyton)

For the epoxy lamp, it should be noted that the LED light’s insulation used for this kind of lamp is different from that of a normal bulb. Therefore, consult the manufacturer's instructions to have guidance on insulating and using insulation materials. "IC Rating" is a keyword to study in this case.

Step 9: Connect the New Cord to the Plug

The next step is to wire the lamp plug connecting the lamp to the power source. After identifying the plug terminals of the hot and neutral wires, continue to slide heat shrink tubing over the stripped end of each wire. For a specific plug style, the hot wire may be connected differently, by screws or prongs. To safely connect the hot or neutral wire to the right terminal, obey the directions given for your plug.

Similarly, make the same connection with the grounding wire to the grounding terminal on the plug as in step 7. 

Connect the hot or neutral wire to the correct plug terminals (source: quora)
Connect the hot or neutral wire to the correct plug terminals (source: quora)

Step 10: Inspect and Secure Wires

When all of the wire connections are done, double-check that they're completely secure and properly insulated. Set up each wire with a light pull to ensure it is securely attached to the correct terminals. Remember that you can use heat shrink tubing or heat and shrink it with a heat gun or lighter to form an accurate seal surrounding the wire connections.

Double-check that all of the wire connections are securely insulated and attached to the correct terminals (source: medium)
Double-check that all of the wire connections are securely insulated and attached to the correct terminals (source: medium)

Step 11: Reassemble the Lamp

Before plugging in the lamp, tighten the wires under the screw heads and clip any excess uninsulated conductor. 

Check and tighten all the details to reassemble the lamp (source: the spruce)
Check and tighten all the details to reassemble the lamp (source: the spruce)

Wrapping electrical tape around the bottom of the socket before putting it back helps to prevent electrocution. Check other parts and make sure that all components fit together perfectly and are correctly attached. Then reattach the insulation sleeve and lamp socket. Install the bulb, and shade, plug in the lamp, and … here - you're done rewiring the old lamp! 

Wrap a layer of electrical tape around the lamp socket while reassembling the lamp (source: the spruce)
Wrap a layer of electrical tape around the lamp socket while reassembling the lamp (source: the spruce)

Note: For epoxy lamps, be aware that epoxy resin cannot withstand high temperatures so the resin lamp's bulb must be attached far enough away from the epoxy resin and ensure that the resin has fully cured.

The resin lamp's bulb should be attached far enough away from the epoxy resin (source: hirosart)
The resin lamp's bulb should be attached far enough away from the epoxy resin (source: hirosart)

Step 12: Test the Rewired Lamp

The two issues that need to be checked are the practical lighting effect and the stable assembly of the lamp. Test the rewired lamp by connecting it to a working electrical outlet, switching it on, and trying several brightness settings (if possible). While the lamp is still on, interact with it to ensure that the stuff stays stable without any glimmer or falling apart.

Thoroughly check the lighting effect and the assembly of the rewired lamp (source: nassau national cable)
Thoroughly check the lighting effect and the assembly of the rewired lamp (source: nassau national cable)

Step 13: Final Safety Checks

If the light bulb does not light up or flickers or overheats, re-check and adjust the wiring connections, or hire a professional electrician.

Monitor the light bulb’s function (source: how stuff works)
Monitor the light bulb’s function (source: how stuff works)

Once you have completed the above steps, you can take a look at further detailed instructions in this video, which shows you better illustrations of how to rewire a lamp:

The above is a guide on how to rewire a lamp with one bulb socket, but if you have a lamp with two or three bulb sockets that need to be rewired, you can refer to the following articles:

Safety Precautions when Rewiring a Lamp

Here are 7 further tips to ensure that you can successfully and safely rewire a lamp.

Using proper tool usage

Using the proper tools for work not only ensures the user's safety, but also boosts productivity and efficiency. In electrical projects and particularly in lamp rewiring work, the right equipment, or rather, specialty electrical tools, can speed up the process and keep you safe.

Proper tools help boost up your work on the rewiring lamp project (source: the spruce)
Proper tools help boost up your work on the rewiring lamp project (source: the spruce)

Following manufacturer instructions

Manufacturer instruction is a dependable source of product information giving methods to solve common problems of the device. Therefore, this is a valuable reference that helps those who rewire a lamp understand the main object of the electrical project, from which set up cost efficient and time-saving repairs for the rewired lamp.

 focusing on information provided by manufacturer can give accurate instructions on how to rewire a lamp (source: step by step)
Focusing on information provided by manufacturer can give accurate instructions on how to rewire a lamp (source: step by step)

Not touching exposed wires

Exposed electrical wires, similar to malfunctioning electrical equipment, can increase the risk of electric shock or fire. As touching expired wires with bare hands can bring about serious injuries or even life-threatening possibilities, people should carry out safety measures such as turning off the circuit breaker or wearing insulating gloves before rewiring a lamp.

Stay away from exposed wires or cords (source: kva electric)
Stay away from exposed wires or cords (source: kva electric)

Keep electrical components dry

It is vital to make sure that the lamp and all electrical components are always kept dry throughout the rewiring process. If electrical components are exposed to water while rewiring a lamp, keep calm and completely dry them before continuing the process. Never be in contact with electrical components with wet hands or while standing on a wet surface.

Water and moisture: two risky factors when rewiring lamp (source: illuminating facts)
Water and moisture: two risky factors when rewiring lamp (source: illuminating facts)

Testing for live wires

A non-contact voltage tester is the most secure method to test live wires by simply putting the machine near the wire. Before interacting with any wires or components, check for remaining voltage with a non-contact voltage tester or multimeter. If there is any suggestion of live electricity, stop the rewiring process and look for assistance from a professional.

Multimeter helps to ensure safety measure for a rewiring project (source: better home & garden)
Multimeter helps to ensure safety measure for a rewiring project (source: better home & garden)

Check Wattage Compatibility

Before rewiring a lamp, always check its label or documentation from the manufacturer to see what wattage is recommended for the product. Using a bulb with a higher wattage than recommended can lead to overheating and, in the worst-case scenario, fire. Therefore, if the ideal wattage is not specified, use a bulb with a wattage that is within range of the lamp's maximum wattage.

Easily identify light bulb wattage by checking information on the bulb itself (source: brilliant. Tech)
Easily identify light bulb wattage by checking information on the bulb itself (source: brilliant. Tech)

Seeking professional assistance if needed

While straightforward, this process can be challenging for individuals lacking technical expertise or time constraints. Using the services of a professional electrician will not only save you time and effort but also prevent other related risks such as fires or electrocutions.

Services provided by a professional electrician can satisfy you (source: forbes)
Services provided by a professional electrician can satisfy you (source: forbes)

Conclusion

Well done! You've thoroughly discovered how to rewire a lamp. Do not forget to put safety first and look for advice from professionals whenever you run into any doubts or problems with the rewire project. With time and effort, you will become more skilled at lamp rewiring and can possibly find novel approaches to tailoring and updating your lamps.

It is time to put all of your newly acquired information into effect and have fun with the sense of accomplishment of successfully rewiring an old lamp!

FAQs

Do I need any special skills or knowledge to rewire a lamp?

Yes, you do need only a little bit of DIY knowledge, but not any special one.

Is it safe to rewire a lamp myself?

Yes, it is. Make sure you study guidelines before rewiring a lamp and do some research on how things should be done. Take safety measures and follow the instructions, paying close attention to the details.

Can any type of wire be used for rewiring a lamp?

The common size used for rewiring a lamp is 0.75mm, also known as 2182Y or 2183Y. However, you had better carefully check the product's power parameters and the manufacturer’s instructions to decide on the best type of wire for your rewired lamp.

How do I determine the wattage of my lamp’s light bulb?

There are some ways to determine the wattage of a bulb, such as double-checking the bundling or label on the actual bulb, referring to the manufacturer’s documentation and website for information about the wattage, or using a wattage meter to estimate the bulb’s wattage.

What should I do if I encounter damaged electrical components while rewiring?

Assess the level of damage to the electrical component to proceed with repair or replacement. If you are unable to repair or replace them, do not try to do so on your own. Take note of the problems and consult with a professional later.

Tags:

Author

I work as a freelance blogger in Seattle, Washington. I've been freelancing full-time for 5 years. I'm interested in anime, resin art, and mechanical keyboards.

amy-golden

Leave a comment

Your email address will not be published. Required fields are marked *